What does the Programmable Temperature and Humidity Chamber do?

What does the Programmable Temperature and Humidity Chamber do?

1, large Programmable Temperature and Humidity Chamber are used to assemble the library board.
If the same supplier manufacturers library board price is about the same, professional production of constant temperature and humidity test chamber library board manufacturers and production of cold storage manufacturers, aging room manufacturers are not the same; good library board for a long time is not deformed, no leakage, the price will be relatively high.
Programmable Temperature and Humidity Chamber
2、Programmable Temperature and Humidity Chamber freezing system
The use of low-temperature compressor, so that the compressor and low-temperature system plays a very good role in the service life is very good.
 
3、Programmable Temperature and Humidity Chamber control system.
The use of TEMI-300 programmable temperature and humidity controller, memory type multi-function control, with each group of refrigeration compressor, solenoid valve, heating HEATER, humidification HEATER and other fully automatic control output function.

评论

发表评论

此博客中的热门博文

How to improve the abrasion resistance of textile fabrics?

图片
 from the yarn category: the wear resistance of yarn is closely related to the structure of yarn. Different spinning methods, different ways of winding fibers in the yarn, and different sizes of holding force between fibers also have different wear resistance. Traditional ring spinning yarn has poor wear resistance because most of the fibers are in the form of spiral threads, and when repeatedly rubbed, the spiral thread fibers gradually become axial fibers, and the yarn is easy to lose twist and disintegrate and wear off quickly. Non-traditional spinning yarn has obvious advantages in abrasion resistance, rotor yarn, jet yarn and vortex yarn are composed of two parts: yarn core and outer fiber, the surface of the yarn wrapped with irregular twisted fiber, the yarn is not easy to disintegrate, while the surface friction coefficient of the yarn is large, in the fabric between the yarn and yarn hold well, not easy to produce relative slip, so the abrasion resistance improved. Compare...
阅读全文

What are the tests that must be done on the interior parts of the car?

图片
What are the tests that must be done on the interior parts of the car?   1、Flame retardant performance   Combustion safety performance is an important indicator of automotive interior materials. Automotive interior materials, especially textiles, must have good flame retardancy and fire retardancy. So that once the car fire danger can ensure that passengers have enough time to leave, or reduce the risk of fire.   Ordinary automotive textile materials may be used to a variety of fibers, because their composition and chemical structure are different, so their thermal and combustion properties are not the same. The current standard used for flame retardant performance testing is GB 8410-2006 "Combustion Characteristics of Automotive Interior Materials", which is applicable to all automotive interior materials. Common evaluation methods are: vertical combustion test, horizontal combustion test, 45° angle combustion test. 2、Atomization performance   Before the use of auto...
阅读全文

Experimental operation of Taber Abrasion Tester

图片
Experimental operation of Taber Abrasion Tester  Taber Abrasion Tester is also called Taber Abrasion Tester. Currently, this instrument is mainly used to test the abrasion resistance of leather and plastic, fabric, floor tiles, plywood and other mat... 1. This step can be cut the standard test piece, and then to be attached to the back of the test piece with double-sided tape (the other side should also be attached to Oh), double-sided tape to remove the paper, weigh the test piece and record the weight, bear paw record to four decimal places. 2. Before opening the test need to confirm the power supply voltage of AC220V, frequency of 50HZ. 3. Before the test lift the test arm of the equipment, and then start the power supply to try to run, we can check from here whether the machine is running properly, and then lift the test arm and vacuum arm, remove the test piece fixing nut and spacer (ring), and then use a wrench to loosen the fixing screw of the fixing ring and pick up the fix...
阅读全文