What is the difference between paper and cardboard Burst Strength Tester?

What is the difference between paper and cardboard Burst Strength Tester?


1, the implementation of the standard :


G229B Pneumatic Bursting Strength Tester implementation of the national standard GB/T454-2002, corresponding to ISO 2758-2001;

G229P Pneumatic Bursting Strength Tester is the implementation of national standard GB/T1539-2007, corresponding to ISO 2759-2001.

G229P pneumatic bursting strength tester.jpg

2、Applicable range:


The scope of application of paper breaking resistance: single-layer or multi-layer paper, not applicable to composite materials (such as corrugated cardboard or linerboard);

The scope of application of paperboard breaking resistance: all paperboard (including corrugated board and cardboard).

评论

发表评论

此博客中的热门博文

How to improve the abrasion resistance of textile fabrics?

图片
 from the yarn category: the wear resistance of yarn is closely related to the structure of yarn. Different spinning methods, different ways of winding fibers in the yarn, and different sizes of holding force between fibers also have different wear resistance. Traditional ring spinning yarn has poor wear resistance because most of the fibers are in the form of spiral threads, and when repeatedly rubbed, the spiral thread fibers gradually become axial fibers, and the yarn is easy to lose twist and disintegrate and wear off quickly. Non-traditional spinning yarn has obvious advantages in abrasion resistance, rotor yarn, jet yarn and vortex yarn are composed of two parts: yarn core and outer fiber, the surface of the yarn wrapped with irregular twisted fiber, the yarn is not easy to disintegrate, while the surface friction coefficient of the yarn is large, in the fabric between the yarn and yarn hold well, not easy to produce relative slip, so the abrasion resistance improved. Compare...
阅读全文

Experimental operation of Taber Abrasion Tester

图片
Experimental operation of Taber Abrasion Tester  Taber Abrasion Tester is also called Taber Abrasion Tester. Currently, this instrument is mainly used to test the abrasion resistance of leather and plastic, fabric, floor tiles, plywood and other mat... 1. This step can be cut the standard test piece, and then to be attached to the back of the test piece with double-sided tape (the other side should also be attached to Oh), double-sided tape to remove the paper, weigh the test piece and record the weight, bear paw record to four decimal places. 2. Before opening the test need to confirm the power supply voltage of AC220V, frequency of 50HZ. 3. Before the test lift the test arm of the equipment, and then start the power supply to try to run, we can check from here whether the machine is running properly, and then lift the test arm and vacuum arm, remove the test piece fixing nut and spacer (ring), and then use a wrench to loosen the fixing screw of the fixing ring and pick up the fix...
阅读全文