Qinsun Martindale Abrasion Tester Technical Advantage Analysis

Qinsun Martindale Abrasion Tester Technical Advantage Analysis

martindale abrasion tester working principle:

Martindale Abrasion Tester refers to the test of textile products based on the standard system of Martindale method and its relationship, and through this test to test the abrasion resistance of the fabric, and abrasion resistance is an important index of textile product quality, which directly affects the durability of the product and the use of the effect, abrasion resistance refers to the fabric or with other substances in the process of repeated friction, resistance to Abrasion resistance refers to the resistance of the fabric to wear and tear during repeated friction with other materials.


martindale abrasion tester diagram:

martindale-abrasion-tester.jpg

There are various methods to test the abrasion resistance of textile products, such as flat grinding method, curved grinding method, folded edge grinding method and compound grinding method. Martindale method is one of the flat abrasion methods, which is widely used in the abrasion testing of garments, home textiles, decorative fabrics and furniture fabrics.

评论

发表评论

此博客中的热门博文

How to improve the abrasion resistance of textile fabrics?

图片
 from the yarn category: the wear resistance of yarn is closely related to the structure of yarn. Different spinning methods, different ways of winding fibers in the yarn, and different sizes of holding force between fibers also have different wear resistance. Traditional ring spinning yarn has poor wear resistance because most of the fibers are in the form of spiral threads, and when repeatedly rubbed, the spiral thread fibers gradually become axial fibers, and the yarn is easy to lose twist and disintegrate and wear off quickly. Non-traditional spinning yarn has obvious advantages in abrasion resistance, rotor yarn, jet yarn and vortex yarn are composed of two parts: yarn core and outer fiber, the surface of the yarn wrapped with irregular twisted fiber, the yarn is not easy to disintegrate, while the surface friction coefficient of the yarn is large, in the fabric between the yarn and yarn hold well, not easy to produce relative slip, so the abrasion resistance improved. Compare...
阅读全文

What are the tests that must be done on the interior parts of the car?

图片
What are the tests that must be done on the interior parts of the car?   1、Flame retardant performance   Combustion safety performance is an important indicator of automotive interior materials. Automotive interior materials, especially textiles, must have good flame retardancy and fire retardancy. So that once the car fire danger can ensure that passengers have enough time to leave, or reduce the risk of fire.   Ordinary automotive textile materials may be used to a variety of fibers, because their composition and chemical structure are different, so their thermal and combustion properties are not the same. The current standard used for flame retardant performance testing is GB 8410-2006 "Combustion Characteristics of Automotive Interior Materials", which is applicable to all automotive interior materials. Common evaluation methods are: vertical combustion test, horizontal combustion test, 45° angle combustion test. 2、Atomization performance   Before the use of auto...
阅读全文

Experimental operation of Taber Abrasion Tester

图片
Experimental operation of Taber Abrasion Tester  Taber Abrasion Tester is also called Taber Abrasion Tester. Currently, this instrument is mainly used to test the abrasion resistance of leather and plastic, fabric, floor tiles, plywood and other mat... 1. This step can be cut the standard test piece, and then to be attached to the back of the test piece with double-sided tape (the other side should also be attached to Oh), double-sided tape to remove the paper, weigh the test piece and record the weight, bear paw record to four decimal places. 2. Before opening the test need to confirm the power supply voltage of AC220V, frequency of 50HZ. 3. Before the test lift the test arm of the equipment, and then start the power supply to try to run, we can check from here whether the machine is running properly, and then lift the test arm and vacuum arm, remove the test piece fixing nut and spacer (ring), and then use a wrench to loosen the fixing screw of the fixing ring and pick up the fix...
阅读全文